JATAS Machinery Sales, Inc. 
503 Frontage Ave. W - Underwood, MN 56586 
1-800-743-2435 / 1-218-826-6464 
 
Back to Punches
 
 
 
 
 
METAL MUNCHER 
Punch Presses 
40 Ton through 135 Ton Capacity Standard Models 
 
GB SERIES 
Gap-Bed Hydraulic Punch Presses 40-ton through 135 ton press only models, with a quality for price ratio unexceeded in the industry. The GB is a great buy in any shop that needs solid dependability in a dedicated punch press, yet needs the ability to expand the capabilities of a press to allow shearing or forming for special jobs. With a standard 14" x 9" throat (18" x 18" option) and a 7" stroke length (9" or 18" throat models), combined with a 48" table (* on 70, 100, 135 ton models), our punch presses easily accept a wide range of standard accessories and special tooling. 
SPECIFICATIONS: 
 
GB-40
GB-70
GB-100
GB-135
Throat Depth
7"
9" (*18")
9" (*18")
14" (*18")
Open Height
9"
14" (*18")
14" (*18")
14" (*18")
Stroke Length/Ram Shaft Diameter
4-1/2" / 2"
7" / 3" (*9")
7" / 3" (*9")
7" / 3" (*9")
Strokes Per Min.Speed-up kit available as option
40 @ 1/2
40 @ 1/2
35 @ 1/2
28 @ 1/2
Platen Table Size(D-W)
10" x 21"
11" x 48"
11" x 48"
11" x 48"
Work Station Height (approx)
34-1/2"
30"
30"
30"
PunchMax. MaterialMax. Hole (with special tooling)
40 ton7/8" thru 1/2"2" thru 1/4"
70 Ton1" thru 7/8"4-1/2" thru 3/16"
100 Ton1-3/16" thru 1"5" thru 1/4"
135 Ton1-11/16" thru 1"4-1/2" thru 3/8"
Plate ShearHy-Performance Blade (Option)Increases Flat Bar Shearing Capacity
NOT AVAILABLE
 
 
 
Angle Shear(with optional accessory)
SEE OPTIONAL EQUIPMENT
Bar ShearRoundSquare
SEE OPTIONAL EQUIPMENT
Coper Notcher
SEE OPTIONAL EQUIPMENT
HydraulicsPump GPMPSI
44000
7.53700
7.54000
7.53500
Motor std. 230/4601800 RPM***OPT: Phase/Voltage
5 HP3 Phase
7-1/2 HP3 Phase
7-1/2 HP3 Phase
7-1/2 HP3 Phase
Dimensions (NET) 
W-L-H (inches) 
Approximate
21x22-7/8"x65-1/2"
48"x30"x68-1/4" 
(*48"x52-1/2"x78-3/4")
48"x30-7/8"x69-1/4" 
(*48"x52-1/2"x80-3/4")
48"x52-1/2"x74-3/4" 
(*48"x52-1/2"x79-1/4")
Weight (Net)Lbs. Approx.
1800
2600(*4600)
3000(*5300)
6200(*7000)
 
 
OPTIONAL ACCESSORIES: 
Mitering Angle Shear
P.O.R
6"x6"x1/2" 90°5"x5"x1/2" 45°
6"x6"x1/2" 90°5"x5"x1/2" 45°
6"x6"x1/2" 90°5"x5"x1/2" 45°
Channel Shear(Std)
2" to 6" Adj.
2" to 8" Adj.
2" to 8" Adj.
2" to 8" Adj.
Bar Shear 
Round 
Square
SEE OPTIONAL EQUIPMENT
Bending
24" of 1/4"
36" of 1/4"48" of 3/16"
36" of 1/4"48" of 3/16"
36" of 1/4"48" of 3/16"
Pipe Notching
P.O.R.
P.O.R.
P.O.R.
P.O.R.
Rod Shear
P.O.R.
P.O.R.
P.O.R.
P.O.R.
Spear Point (Picket) Tooling
P.O.R.
P.O.R.
P.O.R.
P.O.R.
* 18" x 18" throat (9" stroke length) models available in 70,100,135 ton models for nominal price increase. 
** Total plate shearing capacity is approximately 19" with 5" short blade option installed 
***Tonnage will be derated approximately 10% with 208V, single phase, or phase converter. 
WE ARE READY TO QUOTE SPECIALS ALLOWING VARIATIONS IN TONNAGE, TABLE SIZE,OPENING HEIGHT AND THROAT DEPTH, AND STROKE LENGTH. 
OPTIONAL EQUIPMENT: 
  • New Style Gauging Table - Heavy Duty table and adjustable roller stops allow ease of material handling and multiple hole production.  
  • Press Production Table - 16" x 36" std. Other sizes available (Gauging Table available)  
  • Structural Die Block - Punch flanges & web on channel 3" thru 8" wide 1-1/4" OD Die.  
  • Standard 4-way Brake Set - forms bends/lengths from 18" to 48" std.  
  • Special Brake Die Holder - with 9/16" slot in upper & lower to accommodate Press Brake Tooling.  
  • Adjustable Work - Support Rollers fit on each end of press table  
  • Over-sized 28XX & Special Punches and Dies - up to 6" dia. and larger  
  • Portable Work Lamp - 24" gooseneck lamp with magnetic base.  
    • Casters are available for most models. 
    Special tooling is available on request. 
    Some accessories fit models above 40 ton only. 
     
    Contact JATAS