JATAS Machinery Sales, Inc. 
503 Frontage Ave. W - Underwood, MN 56586 
1-800-743-2435 / 1-218-826-6464 
 
Back to Accessories
 
 
 
TIE DOWN ANCHORS 
 
We specialize in the manufacture and installation of recessed in ground tie down anchors for securing items that can be blown away, stolen or moved. Made of 100% stainless steel, with a 4,200 lb tensile strength that will not rust or corrode. Pull out strength varies according to ground conditions. An engineer should determine the proper anchor length requirements. The ring and cup holder are the same for all lengths. The cup holder is approximately 4.25” long, 2.25” wide and 5/8” deep with a 1-1/2” ID ring. The ring rotates or pivots from side to side when being used. The removable, heavy duty stainless steel cover inserts into the base and fastens tight for a flush mount when the tie down is not in use, allowing walking, driving, sweeping or snow plowing over the top.  
 
AN1022 Anchor 
4" & 22" Length
Order With or Without covers
 
Part Number
Work Load
Breaking Strength
Length
Weight
Description
AN1004
1,000#
9,000#
4"
1#
1.5" ID Weld Less Ring
AN1022
1,000#
9,000#
22"
2#
1.5" ID Weld Less Ring
AN2022
2,000#
13,500#
22"
3#
1.25" ID Weld Less Ring
AN5000 Anchor 
22" Up to 40" Length
Order with or without Covers
 
Part Number
Work Load
Breaking Strength
Length
Weight
Description
AN5000
4,500 #
23,500#
24"
6#
2.5" ID Weld Less Ring
AN10000
10,000#
55,000#
31"
10#
2.75" ID Weld Less Ring
 
HK10000 Anchor 
30" Up To 59" Length
Order with or without Covers
Part Number
Work Load
Breaking Strength
Length
Weight
Description
HK10000
10,000#
55,000#
30"
10#
2" ID Weld Less Hook
 
We will custom build anchors  
to your specifications.
 
Call or Email for a quote.
 
Anchor Uses: Aircraft tie down, Event Tents, Hurricane Protection, R.V.’s, Park Furniture, etc. (The uses are endless, whatever you need to keep from blowing away or from being stolen, can now be tied down securely.)
 
The 4” anchor is to be embedded in fresh poured concrete slabs only. The other lengths are installed in concrete, asphalt or turf by auguring an 8” hole at least 6” deeper than the anchor length, fill with concrete, embed the anchorwithin and finish to grade.
 
Heavy duty, flush mounted, stainless steel covers are included with all anchors.
 
Custom anchors built to your specifications available. (P.O.R.)
 
Plus Applicable Tax and Shipping
     
 
 
Contact JATAS